The use of wheel balancing machine mainly includes the following points:
1. Check before operation:
- Before using the wheel balancer, ensure that the equipment is in good working condition, check that the components are in good condition, tight, and the power supply is stable.
- Clean the working environment of the balancing machine and its surroundings to ensure that no debris interferes with the measurement process.
2. Tire preparation:
- The tire should be inflated to the specified air pressure, and the old balance on the tire should be removed and the tire surface cleaned.
- Ensure that the tire is not damaged or deformed, so as not to affect the accuracy of the dynamic balance.
3. Proper tire installation:
- Choose the right vertebral body according to the specifications of the tire and ensure that the tire is firmly locked on the balance shaft.
- Pay attention to the mounting direction of the tire and ensure that the measuring surface is facing the sensor of the balancing machine.
4. Accurate measurement:
- When entering tire data, ensure the accuracy of measurements such as rim distance, width and diameter.
- During the measurement process, maintain the stability of the balancing machine to avoid external interference affecting the measurement results.
5. Add balance block:
- According to the instructions of the balancing machine, the appropriate number of grams of balance blocks are added to the appropriate position of the tire.
- Ensure that the balance block is firmly installed on the tire to avoid falling off during driving.
6. Safe operation:
- In the process of operation, comply with the manual and operating procedures of the balancing machine to ensure personal and equipment safety.
- Operate with appropriate tools and equipment to avoid damage or injury caused by improper use.
7. Regular maintenance:
- Regular maintenance and maintenance of the wheel balancing machine, check whether the accuracy and performance of the equipment are maintained.
- If the equipment is found abnormal or damaged, it should be repaired or replaced in time.
8. Environmental considerations:
- Ensure that the operating environment is dry and ventilated to avoid damage to the equipment caused by damp or high temperature environment.
- During operation, pay attention to environmental protection, avoid noise, dust and other pollution.
Following the above precautions can ensure the normal use of the wheel balancer and the accuracy of the measurement, while ensuring the safety of the operator.
Comments